background image

 

Figure 7 

CAUTION

: Risk of explosion if battery is replaced by an incorrect type. 

Dispose of used batteries according to local regulations. 

5 LEDS indication 

LED Status 

Indication 

Short blinks 

Successful enrollment 

Short blink upon 
transmission 

Normal operation 

Short flash sequence 
during transmission 

Low Battery 

6 Technical Specifications 

Electrical

 

Battery Type

 

CR123 3V Lithium Battery

 

Current consumption 

22

μ

A standby

 

Frequency 915 

MHz 

Dead Time (HOLD ON) 

2.5 minutes

 

Supervision Transmission 

0-255 minutes 

Battery Life 

3 years typical 

Contact size 

32 x 35 x 72 mm (1.3 x 1.4 x 2.8 in.) Magnet 
Size:   16 x 11 x 72 mm (0.6 x 0.44 x 2.8 in.) 

Environmental

 

Operating temperature

 

0°C to 40°C (32°F to 104°F)

 

Storage temperature

 

20°C to 60°C (-4°F to 140°F) 

* Specifications are subject to change without prior notice 

 

Standard Limited Product Warranty (“Limited Warranty”) 

RISCO Ltd. (“

RISCO

") guarantee RISCO’s hardware products (“

Products

”) to be free from 

defects in materials and workmanship when used and stored under normal conditions and in 
accordance with the instructions for use supplied by RISCO, for a period of (i) 24 months from 
the date of delivery of the Product (the “

Warranty Period

”). This Limited Warranty covers the 

Product only within the country where the Product was originally purchased and only covers 
Products purchased as new. 

Contact with customers only

. This Limited Warranty is solely for the benefit of customers 

who purchased the Products directly from RISCO or from an authorized distributor of RISCO. 
RISCO does not warrant the Product to consumers and nothing in this Warranty obligates 
RISCO to accept Product returns directly from end users who purchased the Products for their 
own use from RISCO’s customer or from any installer of RISCO, or otherwise provide warranty 
or other services to any such end user directly. RISCO’s authorized distributor or installer shall 
handle all interactions with its end users in connection with this Limited Warranty. RISCO’s 
authorized distributor or installer shall make no warranties, representations, guarantees or 
statements to its end users or other third parties that suggest that RISCO has any warranty or 
service obligation to, or any contractual privy with, any recipient of a Product. 

Remedies

. In the event that a material defect in a Product is discovered and reported to 

RISCO during the Warranty Period, RISCO shall accept return of the defective Product in 
accordance with the below RMA procedure and, at its option, either (i) repair or have repaired 
the defective Product, or (ii) provide a replacement product to the customer. 

Return Material Authorization

. In the event that you need to return your Product for repair or 

replacement, RISCO will provide you with a Return Merchandise Authorization Number 
(RMA#) as well as return instructions. Do not return your Product without prior approval from 
RISCO. Any Product returned without a valid, unique RMA# will be refused and returned to 
the sender at the sender’s expense. The returned Product must be accompanied with a 
detailed description of the defect discovered (“

Defect Description

”) and must otherwise follow 

RISCO’s then-current RMA procedure published in RISCO’s website at 

www.riscogroup.com

 

in connection with any such return. If RISCO determines in its reasonable discretion that any 
Product returned by customer conforms to the applicable warranty (“

Non-Defective 

Product

”), RISCO will notify the customer of such determination and will return the applicable 

Product to customer at customer’s expense. In addition, RISCO may propose and assess 
customer a charge for testing and examination of Non-Defective Product. 

Entire Liability. 

The repair or replacement of Products in accordance with this Limited 

Warranty shall be RISCO’s entire liability and customer’s sole and exclusive remedy in case a 
material defect in a Product is discovered and reported as required herein. RISCO’s obligation 
and this Limited Warranty are contingent upon the full payment by customer for such Product 
and upon a proven weekly testing and examination of the Product functionality. 

Limitations

. This Limited Warranty is the only warranty made by RISCO with respect to the 

Products. The warranty is not transferable to any third party. To the maximum extent permitted 
by applicable law, this Limited Warranty shall not apply and will be void if: (i) the conditions set 
forth above are not met (including, but not limited to, full payment by customer for the Product 
and a proven weekly testing and examination of the Product functionality); (ii) if the Products 
or any part or component thereof: (a) have been subjected to improper operation or installation; 
(b) have been subject to neglect, abuse, willful damage, abnormal working conditions, failure 
to follow RISCO’s instructions (whether oral or in writing); (c) have been misused, altered, 
modified or repaired without RISCO’s written approval or combined with, or installed on 
products, or equipment of the customer or of any third party; (d) have been damaged by any 
factor beyond RISCO’s reasonable control such as, but not limited to, power failure, electric 
power surges, or unsuitable third party components and the interaction of software therewith 
or (e) any failure or delay in the performance of the Product attributable to any means of 
communication provided by any third party service provider, including, but not limited to, GSM 
interruptions, lack of or internet outage and/or telephony failure. BATTERIES ARE 
EXPLICITLY EXCLUDED FROM THE WARRANTY AND RISCO SHALL NOT BE HELD 
RESPONSIBLE OR LIABLE IN RELATION THERETO, AND THE ONLY WARRANTY 
APPLICABLE THERETO, IF ANY, IS THE BATTERY MANUFACTURER'S WARRANTY.  
RISCO does not install or integrate the Product in the end user’s security system and is 
therefore not responsible for and cannot guarantee the performance of the end user’s security 
system which uses the Product or which the Product is a component of. 

This Limited Warranty applies only to Products manufactured by or for RISCO. Further, this 
Limited Warranty does not apply to any software (including operating system) added to or 
provided with the Products or any third-party software, even if packaged or sold with the RISCO 
Product. Manufacturers, suppliers, or third parties other than RISCO may provide their own 
warranties, but RISCO, to the extent permitted by law and except as otherwise specifically set 
forth herein, provides its Products “AS IS”. Software and applications distributed or made 
available by RISCO in conjunction with the Product (with or without the RISCO brand), 
including, but not limited to system software, as well as P2P services or any other service 
made available by RISCO in relation to the Product, are not covered under this Limited 
Warranty. Refer to the Terms of Service at: 

https://riscocloud.com/ELAS/WebUI/UserLogin/License

 for details of your rights and 

obligations with respect to the use of such applications, software or any service. RISCO does 
not represent that the Product may not be compromised or circumvented; that the Product will 
prevent any personal injury or property loss by burglary, robbery, fire or otherwise, or that the 
Product will in all cases provide adequate warning or protection.  A properly installed and 
maintained alarm may only reduce the risk of a burglary, robbery or fire without warning, but it 
is not insurance or a guarantee that such will not occur or will not cause or lead to personal 
injury or property loss. CONSEQUENTLY, RISCO SHALL HAVE NO LIABILITY FOR ANY 
PERSONAL INJURY, PROPERTY DAMAGE OR OTHER LOSS BASED ON ANY CLAIM AT 
ALL INCLUDING A CLAIM THAT THE PRODUCT FAILED TO GIVE WARNING. 
EXCEPT FOR THE WARRANTIES SET FORTH HEREIN, RISCO AND ITS LICENSORS 
HEREBY DISCLAIM ALL EXPRESS, IMPLIED OR STATUTORY, REPRESENTATIONS, 
WARRANTIES, GUARANTEES, AND CONDITIONS WITH REGARD TO THE PRODUCTS, 
INCLUDING BUT NOT LIMITED TO ANY REPRESENTATIONS, WARRANTIES, 
GUARANTEES, AND CONDITIONS OF MERCHANTABILITY, FITNESS FOR A 
PARTICULAR PURPOSE, TITLE AND WARRANTIES AGAINST HIDDEN OR LATENT 
DEFECTS, TO THE EXTENT PERMITTED BY LAW. WITHOUT LIMITING THE 
GENERALITY OF THE FOREGOING, RISCO AND ITS LICENSORS DO NOT REPRESENT 
OR WARRANT THAT: (I) THE OPERATION OR USE OF THE PRODUCT WILL BE TIMELY, 
SECURE, UNINTERRUPTED OR ERROR-FREE; (ii) THAT ANY FILES, CONTENT OR 
INFORMATION OF ANY KIND THAT MAY BE ACCESSED THROUGH THE PRODUCT 
SHALL REMAIN SECURED OR NON DAMAGED. CUSTOMER ACKNOWLEDGES THAT 
NEITHER RISCO NOR ITS LICENSORS CONTROL THE TRANSFER OF DATA OVER 
COMMUNICATIONS FACILITIES, INCLUDING THE INTERNET, GSM OR OTHER MEANS 
OF COMMUNICATIONS AND THAT RISCO’S PRODUCTS, MAY BE SUBJECT TO 
LIMITATIONS, DELAYS, AND OTHER PROBLEMS INHERENT IN THE USE OF SUCH 
MEANS OF COMMUNICATIONS. RISCO IS NOT RESPONSIBLE FOR ANY DELAYS, 
DELIVERY FAILURES, OR OTHER DAMAGE RESULTING FROM SUCH PROBLEMS. 
RISCO WARRANTS THAT ITS PRODUCTS DO NOT, TO THE BEST OF ITS KNOWLEDGE, 
INFRINGE UPON ANY PATENT, COPYRIGHT, TRADEMARK, TRADE SECRET OR 
OTHER INTELLECTUAL PROPERTY RIGHT IN ANY EVENT RISCO SHALL NOT BE 
LIABLE FOR ANY AMOUNTS REPRESENTING LOST REVENUES OR PROFITS, 
PUNITIVE DAMAGES, OR FOR ANY OTHER INDIRECT, SPECIAL, INCIDENTAL, OR 
CONSEQUENTIAL DAMAGES, EVEN IF THEY WERE FORESEEABLE OR RISCO HAS 
BEEN INFORMED OF THEIR POTENTIAL. 

WARNING

: This product should be tested at least once a week. 

FCC ID: JE4RWX73F915 

This device complies with part 15 of the FCC Rules. Operation is subject to the 
following two conditions: 
(1) This device may not cause harmful interference, and  
(2) This device must accept any interference received, including interference that may 
cause undesired operation. 
Changes or modifications to this equipment which are not expressly approved by the 
party responsible for compliance (RISCO Group's.) could void the user's authority to 
operate the equipment.

 

FCC Note 

This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates uses and can 
radiate radio frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. However, there 
is no guarantee that interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or television reception, which can 
be determined by turning the equipment on and off, the user is encouraged to try to 
correct the interference by one or more of the following measures: 

 

Reorient or relocate the receiving antenna. 

  Increase the separation between the equipment and the receiver. 

 

Connect the equipment into an outlet on to a different circuit from that to which 

the receiver is connected. 

 

Consult the dealer or an experienced radio/TV technician for help. 

Changes or modifications to this equipment which are not expressly approved by the 
party responsible for compliance (RISCO Group's.) could void the user's authority to 
operate the equipment.

 

© RISCO Group 03/17  

 

 

5IN2579 

 

Reviews: