57
Factory Reset
1.
Click the
“
Reset
”
button to reset the RISCO Cloud.
Note:
All stored settings will be erased and RisControl will be restored to the
original Software Version.
The following warning notice will be displayed.
Figure 57: Perform Factory Reset Screen
2.
=Click
“
Yes, Perform Full Factory Reset
”
, or,
“
No, Cancel
”
.
Security System SW Version
Displays the SW Version of the Security System.
Security System IP Address
Displays the IP Address of the Security System.
Users and Permission Settings
The Grand Master and Master Users can add users to the Security System from the
RisControl.
NOTE:
The "Add User" procedure in the RisControl refers to adding Panel Users
and not Cloud Users which is a separate procedure performed using the
RISCO Web User Application.
