18 |
P a g e
1.9
POST TOP 2-WAY EXTENSION BRACKET INSTALLATION
The post-top extension bracket is to be mounted to the top of the middle support post. It will receive two headers running in
opposing directions.
1.
Orient the post-top 2-way extension bracket’s U-channels in the desired direction and slide the square tube over the top
of the center post. Let gravity pull it down. If it resists, tap the top lightly with a mallet.
2.
Locate two 5/16” holes on two opposing sides of the tube, adjacent to the gussets (4 holes total). Drill 3/32” x 1-1/4”
deep pilot holes in the center of the 5/16” holes.
