Rioned MULTI JET, User Manual

Page: 44 / 61

01/18 44
7.12 Operating warm water system
Purpose:
To obtain warm water for better cleaning.
Preparation:
Screw the correct jet nozzle at the end of the high pressure hose.
Start the engine as previously described in this manual.
Use:
Put the handle A upwards to acti-
vate the hot water system.
Remark:
When using the warm water sys-
tem the pressure will go back and
less water will come out of the HP
hose.
Attention:
The water is coming with 55 de-
grees (B) out of the hose.
Turning off:
Pull the handle A down for normal
use of the machine.
Put the original jet nozzle back on the HP hose. You will get the normal capacity
back.
Turn ignition off after job, prolonged stop or storage machine!
A
B
Photo old MultiJet!