Rioned flexJET, User Manual

Page: 58 / 78

01/18 54
• Ensure that the clamp plate is verti-
cally stated before the cover is
placed back.
6. Check the operation of the rear
lights.
• Indicators
• Brake lights
• Tail
• Fog
• Reversing light
• License plate light
8.7 Maintenance remote control
The remote is virtually maintenance free, however, the following points must
be observed:
• Protect the transmitter from water / moisture.
• Do not clean the transmitter and receiver with a pressure washer or
other atomizing device.
• Charging and discharging the transmitter regularly.
• Disconnect the plug of the receiver regularly, otherwise it gets stuck
with the result that there is interference.
8.8 Hydraulic system
Renew oil
Important!
You have to renew the environment friendly hydraulic oil at least ones
a year!
Only use oil HESTIA 46.
Order number Rioned 71-003-500-046
Check, every time before use, if the level of the oil is sufficient.
Proceed as follows:
1. Stop the machine.
2. Be aware that the machine is standing horizontal.
3. Take the dipstick (A) out of the oil tank (B).
4. Clean the dipstick with a tissue.
5. Put the dipstick into the oil tank.
6. Take the dipstick back and watch at the dipstick if the oil is between
maximum a minimum (C).
7. Fill oil, if necessary.
8. Fasten the dipstick onto the oil tank.
9. Start the engine and let it turn for about 5 minutes.