01/18
43
el to low, the solenoid opens. You are always sure of water during working with
the machine.
Installation:
1.
Couple a supply hose on to the coupling of
the supply pipe or use the supply hose.
2.
Open the water tap.
3.
Switch on the level control.
Now the water tank gets filled with water.
Stop filling the water tank:
1.
Close the water tap.
2.
Switch off the level control.
3.
Depressurize the supply pipe. Press the
button.
4.
Uncouple the supply hose.
7.6
Suction Ventury
Purpose:
The suction ventury takes care that you can pump dirt and/or liquid out of res-
ervoirs.
Operation:
The water in the water tank is pumped through the ventury. In the ventury
forms a vacuum. This vacuum causes the surface water is sucked up. All the
water mixes and ends up in the water tank
Preparations:
You must always check if there is enough water in the water tank. If this is not
the case the ventury never works.
Use:
1.
Connect the coupling of the HP hose onto the coupling of the suction
ventury.
2.
Place the basket of the suction hose in the surface water.
3.
Open the tap.
4.
Turn on the high pressure pump.
Summary of Contents for flexJET
