Rioned flexJET, User Manual

Page: 39 / 78

01/18 35
11. Push button (Stop spraying) on the control box and close
the HP valve.
12. Connect the high-pressure hose to the water fill hose using a special
GK hose coupling.
13. Push button (Start spraying) on the control box and open
the HP valve.
14. Let the high-pressure pump fill the supply hose with antifreeze.
15. Push button (Stop spraying) on the control box and close
the HP-valve.
16. Switch off the machine.
Now the machine is ready for departure!
5.15 Additional preparations when preparing for use:
1. Connect the high-pressure hose at the antifreeze tank.
2. Turn on the machine and let the high-pressure pump drain all anti-
freeze into the antifreeze tank.
The antifreeze can be reused. Ensure that no water is mixed with the
antifreeze. If water gets into the antifreeze, it is not suitable for re-use.
Dispose the used antifreeze properly, hand it into a local depot for dis-
posal of industrial waste.
3. Stop the machine and prepare it for use.