02/12
7
1
INTRODUCTION
RIONED thanks you for your purchase of the RIONED drain and sewer-clearing
machine. We recommend that you read this manual thoroughly and see that
the machine is handled and maintained in the proper manner. If your machine
should give trouble and need servicing, when you want to order parts, or if you
have any questions, contact your RIONED dealer.
The machine is built by:
RIONED
P.O. Box 5070
5004 EB Tilburg
The Netherlands
Telephone: +31 13 5479100
Telefax: +31
13
5479104
The Rioned high-pressure device has been especially designed and manufac-
tured for cleaning drains, walls, floors, and terraces with cold or hot water. For
cleaning drains, special nozzles are included in the delivery; for all other pur-
poses, the spray gun, which is also included, can be used.
This manual contains all the necessary information concerning control and
maintenance. If the device is positioned correctly, properly controlled, and reg-
ularly maintained, a warranty will be given according to the general conditions
of delivery. However, should it arise that the control and maintenance proce-
dures are not diligently followed, the warranty will become invalid.
Use this machine only for cleaning drains, walls, floors and terraces with cold
or hot water and to drain liquid with or without pollution like sand, stones etc.
Use this machine only outside. If you want to work inside a building to have to
ensure that there is enough ventilation.
During the time that the weather conditions are bad, we recommend that you
do not use the machine (lightning)!
Authorised personnel may only use the machine.
The machine can not be used in an explosive environment.
Fill the clean water tank only with water.
It is strongly forbidden to drain flammable materials, chemicals, and elements
with special regulations.
In this manual you will find all necessary information concerning operations and
maintaining your machine. If handled properly, your machine is guaranteed ac-
cording the general delivery conditions.
1.1 Use
The integrated engine drives the high-pressure pump, the hydraulic pump, and
the vacuum pump via a hydraulic system.
The high-pressure pump receives water from the water tank via the water filter
and pressurises it. The pressure can be continuously adjusted. The pressurised
water leaves the machine via the high-pressure hose on the reel.
Summary of Contents for Flexcom
