28
Measurement
2. Pressing the PICKUP key again in the condition of step 1 activates
the sensitivity (SENS) setup display.
The sensitivity value can be changed with the RANGE
/
keys
for the respective channel.
Holding down a key causes the range setting to change quickly.
The setting can be made for three effective digits.
When the setting has been made for channel A and channel B, press
the PICKUP key.
Note
Sensitivity setting units
pC/(m/s
2
): CHARGE
mV/(m/s
2
): CCLD
3. When you press the PICKUP key, the unit returns to the measure-
ment mode, and accelerometer related setup is complete.
By pressing the SETUP key at any point during step 1 or step 2, the
current setting can be made active immediately. The unit returns to
measurement mode.
CHARGE
SENS
m/s
2
Hz
kHz
CHARGE
SENS
m/s
2
HPF
LPF
Hz
kHz
HPF
LPF
A
B
Hold down RANGE
/ keys
for rapid change
Charge sensitivity
Channel B
setting is for charge
sensitivity of other accelerometer
Channel A
Set to CHARGE
SENS
Set to charge sensitivity
as indicated
in calibration data chart
Summary of Contents for UV-16
Page 2: ......
Page 10: ...viii...
