Rinstrum D32 series, Manual

Page: 18 / 48

Remote Display Installation Manual
– Software Version 4.x
Page 18 D300-602-202
5.4.2. Protocol 2: Ranger B
Character
Number
0 1 2 3 4 5 6 7 8 9 10
Description
S
TX
S
ta
tu
s
S
ign
W
e
igh
t
W
e
igh
t
W
e
igh
t
W
e
igh
t
W
e
igh
t
W
e
igh
t
W
e
igh
t
Units
Character
Number
11 12 13
Description
Units Units
E
TX
Function Description
STX Start of Transmission Character (ASCII 02H).
Sign Represents the sign of the weight reading (space for positive, dash
(-) for negative.
Weight These seven characters are a string containing the current weight
including the decimal point. If there is no decimal point, then the
first character is a space.
Examples:
( 300) with a leading space would represent 300 units.
( 3.00) Is another acceptable string.
Status The status character provides information on the weight reading.
The characters G/N/U/O/M/E represent
Gross/Net/Underload/Overload/Motion/Error, respectively. A
space (ASCII 20H) can also be sent. This character may only
represent one status at any one time.
Units A three character string, the first character being a space, followed
by the actual units. eg. ( kg) or ( t). If the weight reading is not
stable, the unit string is sent as ( ).
ETX End of Transmission character (ASCII 03H).