Rinstrum D32 series, Manual

Page: 17 / 48

Remote Display Installation Manual
– Software Version 4.x
D300-602-202 Page 17
5.4.1. Protocol 1: Ranger A
Character Number 0 1 2 3 4 5 6 7 8 9 10
Description
S
TX
S
ign
W
e
igh
t
W
e
igh
t
W
e
igh
t
W
e
igh
t
W
e
igh
t
W
e
igh
t
W
e
igh
t
S
ta
tu
s
E
TX
Function Description
STX Start of Transmission Character (ASCII 02H).
Sign Represents the sign of the weight reading (space for positive, dash
(-) for negative. The sign character can be replaced by an
L which
disables the 10 display timeout (ie. forcing the display to lock on).
Weight These seven characters are a string containing the current weight
including the decimal point. If there is no decimal point, then the
first character is a space.
Examples:
( 300) with a leading space would represent 300 units.
( 3.00) Is another acceptable string.
Status The status character provides information on the weight reading.
The characters G/N/U/O/M/E represent
Gross/Net/Underload/Overload/Motion/Error, respectively. A
space (ASCII 20H) can also be sent. This character may only
represent one status at any one time.
ETX End of Transmission character (ASCII 03H).