Rinnai 35
SS850 Freestanding IM
ABNORMAL FLAME PATTERN
Each Rinnai Gas Fire has a distinct flame pattern. The flame should look the same every time you start your
heater, after an initial warm up period of approximately 15 minutes.
Abnormal flame performance and/or pattern can indicate a problem with your heater, such as blocked gas injectors,
incorrectly installed / inadequate flue system or the Ceramic logs may have shifted from when the heater was first
installed.
There are some warning signs that could indicate a problem. If any of the signs below occur, please contact Rinnai.
Key signs of abnormal flame performance:
•
Appliance turns 'OFF' soon after start up and does not relight.
•
Continued difficulty or delay in establishing a flame
•
Flame appears overly orange-yellow.
•
Flame appears either very short or very long.
•
Flame only burns part way across the burner.
•
Severe soot building up on the inside of the glass or on logs.
•
Continuous unusual smell from the appliance.
•
Continued difficulty or delay in establishing a flame.
NOTE
This appliance incorporates a live fuel effect and is designed to operate with luminous flames. This
may leave slight carbon deposition as part of its normal operation.
NORMAL FLAME PATTERN
ABNORMAL FLAME PATTERN
SOOT BUILD UP
COMMISSIONING
