IBF - Slimfire 25
- 16 -
Issue 5 - ©Rinnai
Step. 1: Preparation of the Logset
Remove the logset and granule packet
from their packaging.
To achieve the correct location of the
Logset, hold the Logset as shown
(Fig. 1).
Step. 2: Initial positioning, locating
the Logset in the combustion
chamber
Tilt the back of the Logset upwards
locating the front feet (1.) behind the
unpainted inner horizontal steel lip (2.)
(Fig. 2).
Ensure the Logset sides do not touch the
combustion chamber panel walls.
Step. 3: Final positioning, setting the
Logset into the combustion chamber
Rotate the back of the Logset down using
the location of the front feet (3.) as pivot
points (Fig. 3).
Step. 4: Correct Logset installation
This image illustrates how a correctly
installed Logset will look on completion
(Fig. 4).
Step. 5 Adding granules
Carefully PLACE (do not pour) sufficient
granules onto the front burner only.
Avoid pushing the granules under the log
or spilling over the front of the burner.
Step. 6 Replacing Glass
Replace the glass ensuring the joint in the
glass sealing tape is at the bottom.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
INSTALLERS INFORMATION - LOG INSTALLATION