9
H4123 025961 Rev. A July 2012
Installation and Owner’s Manual – Heat Pump
Electrical Connections
Step 4
• A properly authorised electrical
contractor must connect the unit.
• The unit is rated at 10 amps (2
core and earth) so the power mains
supplying the unit must have a 10
amp minimum double pole circuit
breaker fitted.
• The electrical connection must
comply with local supply authority
regulations and AS3000.
• The unit
must be connected to:
- CONTINUOUS TARIFF, single
phase 240 volt AC supply.
- Tariff 33 (QLD only), single phase
240 volt AC supply.
Caution: The water heater
must be filled with water
before turning on the
electricity supply.
Installation Instructions
