Evolve 952/1252 Installation Guide: 13115-E 05-19 |
9
To ensure the appliance performs correctly, without rattling, it must be installed on a flat level
support base that allows free movement of the appliance. The joists used to support the appliance
off the ground must be capable of supporting a minimum of 1.5 times the weight of the appliance.
Wheels, located at the rear of the heater, allow the unit to slide in and out of the enclosure for
installation and maintenance.
D
W
H
Framing dimensions
Enclosure dimensions
952
1252
W-width
965-980 mm 1265-1280 mm
H-height
570-580 mm 570-580 mm
D-depth
570 mm min. 570 mm min.
The main points governing location are flueing and warm air distribution. The
Rinnai Evolve has an integrated zero clearance box that isolates the appliance
from combustible materials. This means it can be installed directly into a decorative
fireplace constructed from materials such as wood or plaster.
Left
wheel
Right
wheel
850 mm (Evolve 952)
1030 mm (Evolve 1252)
Joist
Joist
Plywood board, minimum 18 mm
For the Evolve 1252 there is an
additional wheel in the center
Installer please note
Issues caused by ‘rattling’
fires not installed on a flat
level base, as detailed in
these instructions, will not be
covered by warranty.