Evolve 952/1252 Installation Guide: 13115-E 05-19 |
19
7. Front large middle log
Place onto the locating pin of log four and slot onto the
right front locating bracket.
8. Top upper right large log
Place onto the locating pin of log seven and swivel
OVER log 4. For the 952 the end rests into the burner
slot. For the 1252 the end will rest in FRONT of the
locator tab.
5. Front middle small log
Refer fully assembled image for reference. Place onto
the middle locating pin and central front locator bracket.
6. Front large left log
Place onto the locating pin of the first log and slot onto
the left front locating bracket.
5
6
7
8
3. Front left small log
Refer fully assembled image for reference. Place onto
the middle left locating pin and left front locator bracket.
4. Front right small log
Refer fully assembled image for reference. Place onto
the middle right locating pin and right front locator
bracket.
3
4
1. Back left log
Align bottom locating holes with the locating pins at the
back of the burner
—
the log will sit up against the back
of the combustion chamber.
2. Back right log
Align bottom locating holes with the locating pins at the
back of the burner
—
the log will sit up against the back
of the combustion chamber, and there will be a gap
between the back two logs.
1
2
The installation procedure for both models is the same. The only difference is the position of log
eight and the addition of logs 9 and 10
—the Evolve 1252 has an extra two logs.