110824_C
1
Rimage AutoPrism
™
Setup and Installation
Unpack the Prism printer.
1
Install the Prism printer.
2
Place the
Prism printer
on the AutoPrinter so the plastic
feet slide into the slots on the printer plate.
Connect the cables.
3
b. Connect the
USB cable
from
the Prism printer
to the PC.
a. Connect the
printer
cable
from the
AutoPrinter to the
Prism printer.
c. Connect
the
power
cord
from the
AutoPrinter to a
power outlet.
d. Connect the
short power
cord
from the
AutoPrinter
to the Prism
printer.
Install the printer driver.
4
For detailed instructions, refer to the
PrismPlus! Printer User
Guide.
Install the CD Designer Software Suite.
5
With the CD Designer Software Suite disc in the PC disc drive,
navigate to
Setup.exe
and follow the prompts to install the
software.
a. Open the Prism printer
packing box
.
b. Remove the
Prism printer
from the packing box.
c. Remove the
packing foam
from the ends of the Prism
printer.
d. Remove the
plastic bag
from the Prism printer.
e. Remove the
top cover
of
the Prism printer.
f. Remove the
foam inserts
.
g. Replace the
top cover
.
Printer Plate
Slots
Top Cover
Foam Inserts
Printer
Packing Foam