T
I
+44 (0)1926 290 418 E
I
I
www.rigtec.com
10
ADJUSTMENT
SYSTEM
The Air Frame features an adjustment system to fine tune projection
set ups. There are 3 controls to make adjustments to the Roll, Pitch
and Yaw axes:
Ratchet Handles;
one on each side of the front of the frame. Each
handle features a switch to reverse the direction of the adjustment;
position the switch to the left to lower the adjustment plate, position
the switch to the right to raise the adjustment plate.
The Yaw Adjustment Handle,
is positioned on the rear right hand side
of the frame. Twisting this clockwise moves the projected image to
the left, twisting it anti
-
clockwise moves the projected image to the
right.
1.
To control the projector on the
Roll Axis
, operate the Ratchet
Handles in opposite directions (Anti
-
Clockwise to raise one side,
Clockwise to lower the other side).
2.
To control the projector on the
Pitch Axis
, operate the Ratchet
Handles in the same directions (Anti
-
Clockwise to raise, Clockwise
to lower).
3.
To control the projector on the
Yaw Axis
, operate the Yaw
Adjustment Handle. Clockwise for movement to the left and Anti
-
Clockwise for movement to the right.
1
3
2
