RIGOL
TX1000 RF Demo Kit Application Note
3
To Control TX1000 Using PC Software
Software Installation
When using TX1000 with the PC, you have to install the PC control software of TX1000.
System and Installation Requirements
1.
Hardware Configuration Requirements
Processor: 1 GHz and greater
Memory: 500 MB and greater
Display: 1024×768 or higher resolution
Hard Disk: 200 MB and greater
2.
Running Environment
Operation System: Windows XP (32-bit), Windows 7 (32-bit), Windows Vista (32-bit)
PC administrator privileges: use the administrator account to log into the PC
The
RIGOL
common PC software (Ultra Sigma 00.01.05.05 or higher version) has been
installed.
Installation Procedures
1.
Before installing the software, install Ultra Sigma 00.01.05.05 or higher version. For the
installation procedures, refer to the related manual of Ultra Sigma.
2.
RIGOL
provides the installation package (in the CD in the product package) of the PC control
software of TX1000. Double-click the TX1000 setup.exe file to enter the interface as shown
in the figure below and follow the instructions to finish the installation.
