RIGOL
Chapter 4 Functions of the Front Panel of EMI
4-34 RSA3000E User Guide
Marker->
Adds the new measurement results to the existing signal table.
Mkr->List
Adds the frequency at the current marker to the signal table.
Remarks:
The newly added signal frequency information is sorted according to the current
ordering rule.
If the trace detector matches the detector in the signal table, then the
corresponding amplitude and limit delta values will be updated.
Meas at Mkr->List
Adds the current measurement results (including frequency, marker amplitude, and
limit delta) to the signal table.
Remarks:
If the invalid marker measurement is executed, then errors may occur and you
cannot add the measurement results to the signal table.
The newly added signal measurement result information is sorted according to
the current ordering rule.
If the trace detector matches the detector in the signal table, then the
corresponding amplitude and limit delta values will be updated.
Meter->Mkr Freq
Sets the frequency of the meter to the frequency at the currently selected marker.
Mkr->Meter Freq
Sets the frequency at the currently selected marker to the frequency of the meter.
Meter->Signal
Replaces the frequency of the currently selected signal with the currently set
frequency of the meter.
