Rigol MSO8000 Series, User Manual

Page: 346 / 396

RIGOL
Chapter 19 Store and Load
19-14 MSO8000 User Guide
Refer to Step 3 and use the same method to input the remaining Chinese
characters "
件名
" in sequence.
5. Modify or Delete the Unwanted Characters that Have Been Entered.
When inputting the filename, you can modify or delete the filename characters
input in the "Name Input Area" as well as delete the pinyin characters input in
the "Pinyin Input Area". To delete the input characters, rotate the multifunction
knob
in the virtual keypad to select the delete key . Press down the key
to delete the characters. To modify the input characters, delete the unwanted
characters and input the desired characters again. If the character to be
modified is in the middle, press the delete key
to delete the characters
starting from the last one to the character to be modified, then input the new
character again.
If the touch screen is enabled, tap to directly move the cursor to the character
required to be modified or deleted, and then input the desired character again or
delete the character.
6. After finishing the input, rotate the multifunction knob and press OK . The
oscilloscope will create a folder or a specified type of file with this name under
the current directory.
To Delete a File or Folder
1. Delete a File or Folder from the Internal Memory
1) Press Storage
→
Disk and rotate the multifunction knob to select the
internal memory "Local Disk(C)". Press down the knob to open it.
2) Rotate the multifunction knob to select the file or the folder to be
deleted.
3) Press Delete , and then a confirmation dialog box is displayed. Tap to select
"Yes" to delete the file or the folder.
2. Delete a File or Folder from the External Memory
1) Press Storage
→
Disk and rotate the multifunction knob to select the
external memory. Press down the knob to open it.
2) Rotate the multifunction knob to select the file or the folder to be
deleted.
3) Press Delete , and then a confirmation dialog box is displayed. Tap to select
Tip
If characters already exist in the Pinyin input area, when you rotate the
multifunction knob
to delete the characters in the name input area, the
characters in the Pinyin input area will be deleted first.