Rigol MSO5000 Series, User Manual

Page: 89 / 358

Chapter 5 To Trigger the Oscilloscope
RIGOL
MSO5000 User's Guide 5-7
Noise Rejection
Noise rejection can reject the high frequency noise in the signal and reduce the
possibility of miss-trigger of the oscilloscope.
In the trigger control area (Trigger) on the front panel, press
Menu to enter the
trigger setting menu, then press Noise Reject continuously (for some triggers,
Noise Reject is a sub menu under More , at this time, press Menu

More

Noise Reject ) to enable or disable noise rejection.
Note: This function is only available when the trigger source is an analog channel.
Trigger Type
MSO5000 series oscilloscope provides the following trigger types.

Edge Trigger

Pulse Trigger

Slope Trigger

Video Trigger

Pattern Trigger

Duration Trigger

Timeout Trigger

Window Trigger

Delay Trigger

Setup/Hold Trigger

Nth Edge Trigger

RS232 Trigger (Option)

I2C Trigger (Option)

SPI Trigger (Option)

CAN Trigger (Option)

FlexRay Trigger (Option)

LIN Trigger (Option)

I2S Trigger (Option)

MIL-STD-1553 Trigger (Option)
www.
GlobalTestSupply
.com
Find Quality Products Online at: sales@GlobalTestSupply.com