Rigol DSG800 Series, Quick Manual

Page: 24 / 72

RIGOL
12 DSG800 Quick Guide
12. OCXO (Option OCXO-B08)
OCXO is an oven controlled crystal oscillator. It is a
frequency reference source with higher
temperature stability.
Note: Sixty minutes of warm-up is required for the
OCXO to reach its rated frequency.
For the ordering information of this option, please
refer to the data sheet of this product.
To Use DSG800 for the First Time
To Connect the Power Supply
Please connect the RF signal generator to AC power supply using the power cable
supplied in the accessories. This RF signal generator can accept 100 V to 240 V, 45
Hz to 440 Hz AC power supplies. The power consumption of the instrument cannot
exceed 60 W. When the RF signal generator is connected to AC power supply via this
connector, the instrument selects the correct voltage range automatically and users
do not need to select the voltage range manually.
CAUTION
To avoid electric shock, use standard plugs.
Power-on Inspection
After the power supply is correctly connected, press the power key
at the front
panel to turn on the RF signal generator. During the start-up, the instrument
performs initialization and self-test. After that, the instrument enters the default
interface.
To Set the System Language
DSG800 series RF signal generator supports multiple system languages. You can
press Syst

Language to switch the system language.