Rigol DSG800 Series, Quick Manual

Page: 22 / 72

RIGOL
10 DSG800 Quick Guide
When the pulse modulation source is "Int" and the
trigger mode is "Ext Gate", this connector is used
to input the external gated signal.
5. Power Input Connector
Power input connector.
This RF signal generator can accept 100 V to 240
V, 45 Hz to 440 Hz AC power supplies. The power
consumption of the instrument cannot exceed 60
W.
6. I/Q Modulating Signal Input/Output Connectors (Option DSG800-IQ)
When the I/Q modulation source is "Ext", it is
used to input the I (In-Phase) baseband signal of
I/Q modulation.
When the I/Q modulation source is "Ext", it is
used to input the Q (Quadrature Phase) baseband
signal of I/Q modulation.
It is used to output the I (In-Phase) components
of I/Q modulation of the built-in baseband
generator.
It is used to output the Q (Quadrature Phase)
components of I/Q modulation of the built-in
baseband generator