manualshive.com logo in svg

Rigol DSG5000 Series, Programming Manual

Share
Download
Rigol DSG5000 Series Programming Manual Download Page 18

Queries the limit of the RF output amplitude for the specified channel.

Parameter

Name

Type

Range

Default

<channel>

Discrete

1|2|3|4|5|6|7|8

1

<value>

Real

-30 dBm to 25 dBm

25 dBm

<unit>

Discrete

dBm|V|W|dBmV|dBuV

dBm

Remarks

•

When < value> is set in "Number" form (for example, 2), the default unit is

dBm. When set in " Unit" form (for example, 2dBm), the level

displayed in the interface of the microwave signal generator is related to the

setting of the level unit.

-

When the level unit is "dBm", 2.00dBm is displayed.

-

When the level unit is "dBmV", 48.99dBmV is displayed.

-

When the level unit is "dBuV", 108.99dBuV is displayed.

-

When the level unit is "Volts", 281.50mV is displayed.

-

When the level unit is "Watts", 1.58mW is displayed.

•

The default unit of the return value is dBm.

Return Format

The query returns the limit of the RF output amplitude for the specified channel.

Example

:LEV:LIM 5.6 /*Sets the limit of the RF output amplitude of CH1 to 

5.6dBm (by default, CH1 is selected).*/

:LEV:LIM? /*The query returns 5.60.*/

3.1.2.3

[:SOURce][:RF]:LEVel:OFFSet

Syntax

[:SOURce][:RF

<

channel>

]:LEVel:OFFSet

 <

value>

[:SOURce][:RF

<

channel>

]:LEVel:OFFSet?

Description

Sets the amplitude offset of the RF output for the specified channel.

 Command System

10

Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.

Summary of Contents for DSG5000 Series

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands