Rigol DSG3000B Series, Service Manual, Page: 28 / 37

RIGOL
Chapter 1 Disassembly and Assembly
1-20 DSG3000B Service Guide
Disassemble the LCD
Figure 1-18 Disassemble the LCD
Part Description:
①
2 screws (M3*6 torx flat head countersunk screw, used for fastening the LCD)
②
3 screws (M3*6 torx pan head combination screw, used for fastening the PCB board)
Disassembly Steps:
1. Use the T10 screwdriver to remove all the screws that secure the LCD assembly.
2. Remove the LCD assembly from the front metal panel.
3. Remove the screws from the LCD shield and remove the PCB board.
Tip:
Before disassembling the LCD assembly, pay attention to the connecting positions
of the cables to avoid incorrect connection or incomplete connection when
assembling the cables.
①
①
②
x3