Chapter 1 Disassembly and Assembly
RIGOL
DSG3000B Service Guide
1-17
Disassemble the IQ Module
Figure 1-15 Disassemble the IQ Module
Part Description:
①
4 BNC nuts (used for securing the BNC connectors)
②
5 screws (M3*20 torx pan head combination screw, used for fastening the IQ module)
③
2 screws (M3*6 torx pan head combination screw, used for fastening the IQ module)
Disassembly Steps:
1.
Use the BNC socket wrench to remove the BNC nuts and washers for securing the BNC
connectors.
2.
Use the T10 screwdriver to remove all the screws that secure the IQ module.
3.
Remove the IQ module gently.
Tip:
Before disassembling the IQ module, pay attention to the connecting positions of the cables
to avoid incorrect connection or incomplete connection when assembling the cables.
①
x4
③
x2
②
x5
Summary of Contents for DSG3000B Series
Page 1: ...Service Guide DSG3000B Series RF Signal Generator Aug 2020 RIGOL TECHNOLOGIES CO LTD...
Page 2: ......
Page 32: ......