Rigol DSG3000B Series, Service Manual, Page: 17 / 37

Chapter 1 Disassembly and Assembly
RIGOL
DSG3000B Service Guide 1-9
Disassemble the ATT Module
Figure 1-7 Disassemble the ATT Module
Part Description:
①
3 screws (M3*35 torx pan head combination screw, used for fastening the ATT module)
②
2 screws (M3*20 torx pan head combination screw, used for fastening the ATT module)
③
3 screws (M3*14 torx pan head combination screw, used for fastening the ATT module)
Disassembly Steps:
1. Use the T10 screwdriver to remove all the screws that secure the ATT module.
2. Remove the ATT module gently.
Tip:
Before disassembling the ATT module, pay attention to the connecting positions of the cables
on the ATT module to avoid incorrect connection or incomplete connection when assembling
the cables.
①
x3
②
x3
③
x3