Rigol DSA1000A Series, Programming Manual

Page: 38 / 174

RIGOL
Chapter 2 Command Systems
Programming Guide for DSA1000A series 2-24
:CALCulate:MARKer<n>:X:STOP?
Function Sets the X value of the delta marker on related trace in “Delta Pair”.
The unit of the X value corresponds to the unit of the current marker
trace.
Such as :CALC:MARK1:X:STOP 1820000000
The query returns “1820000000”.
Explanations

<n> is 1, 2, 3 or 4.

<param> is within the range of X.
If current readout mode is “Frequency”, the range cannot
exceed the sweep frequency and unit input of Hz (default),
kHz, MHz or GHz is available.

If current readout mode is “
△
time”, the range cannot exceed
the sweep time and unit input of s (default), us, ms or ks is
available.
Front Panel Marker, Delta Pair, Delta
54. :CALCulate:MARKer<n>:Y?
Syntax :CALCulate:MARKer<n>:Y?
Function The query returns the Y-axis readout of the specified marker, the
default unit is dBm, such as -2.697830E-01
.
55. :CALCulate:NTData[:STATe]
Syntax :CALCulate:NTData[:STATe] OFF|ON|0|1
:CALCulate:NTData[:STATe]?
Function Turns on or off the Normalization function.
The query returns “0” or “1”.
Default OFF|0