Chapter 1 Disassembly and Assembly
RIGOL
DG900 Service Guide
1-9
Disassemble the Main Board
Figure 1-7 Disassemble the Main Board
Part Description:
①
7 screws (torx pan head combination screw FW3*6) used for fastening the main board and metal
bracket.
Disassembly Steps:
1.
Use the T10 screwdriver to remove 7 screws (
①
) that secure the main board and metal bracket.
2.
Lift the back end of the main board slightly so that the positioning columns of the metal bracket
are detached from the main board, and then take off the main board gently.
Main Board
①
①
①
①
①
①
①
Metal Bracket
Summary of Contents for DG900 Series
Page 2: ......
