Chapter 1 Disassembly and Assembly
RIGOL
DG900 Service Guide
1-7
Disassemble the Lower Shell
Figure 1-5 Disassemble the Lower Shell
Part Description:
①
6 screws (torx pan head combination screw FW3*6) used for fastening the lower shell assembly
(metal b lower shell).
Disassembly Steps:
1.
Use the T10 screwdriver to remove 6 screws (
①
) that secure the lower shell assembly.
2.
Remove the metal bracket with the main board fixed from the lower shell assembly.
Note:
When assembling the lower shell, the locating columns of the lower shell need to pass through
the locating hole of the metal bracket.
Lower Shell
①
①
①
①
①
①
Metal Bracket
Summary of Contents for DG900 Series
Page 2: ......
