RIGOL
Chapter 1 Disassembly and Assembly
1-6
DG900 Service Guide
Disassemble the Power Board
Figure 1-4 Disassemble the Power Board
Part Description:
①
4 screws (torx pan head combination screw FW3*6) used for fastening the power board.
Disassembly Steps:
1.
Disconnect the cables from the power board.
2.
Use the T10 screwdriver to rem ove 4 screws (①) that secure the power board.
3.
Take off the power board gently.
Tip:
Before disconnecting the cables from the power board, pay attention to the connecting positions of
the cables to avoid incorrect connection or incomplete connection when assembling the cables.
①
①
①
①
Power Board
Summary of Contents for DG900 Series
Page 2: ......
