Rigol DG4062, User Manual

Page: 70 / 238

RIGOL Chapter 3 Arbitrary Waveform Output
DG4000 User's Guide
3-2
To Enable Arbitrary Waveform
Press
Arb to enable arbitrary waveform function and open the operation menu of
arbitrary waveform.
1.
Freq/Period: set the "Freq/Period" of the arbitrary waveform.
2. Ampl/HiLevel: set the "Ampl/HiLevel" of the arbitrary waveform.
3. Offset/LoLevel: set the output "Offset/LoLevel" of the arbitrary waveform.
4. Phase: set the "Start Phase" of the arbitrary waveform.
5. Align Phase: refer to "Align Phase".
6.
Point By Point: enable the point by point output mode of arbitrary waveform.
7. Select Wform: select the built-in waveforms, user-defined arbitrary
waveforms stored in the internal or external memory of the instrument,
volatile waveforms or DC.
8. Create New: create a new arbitrary waveform and overwrite the waveform
currently in the volatile memory. Users can define 2pts to 16 kpts arbitrary
waveforms.
9.
Edit Wform: edit the waveform currently in the volatile memory.
Refer to "
Basic Waveform Output" to configure the parameters and output.
This chapter will focus on "Point By Point", "Select Waveform", "Create New" and
"Edit Waveform".