Rigol DG4062, User Manual

Page: 164 / 238

RIGOL Chapter 9 Store and Recall
DG4000 User's Guide
9-6
File Operation
When "File" is select as the browser type, users can perform a series of operations
on files including Save, Read, Copy, Paste, Delete and New Directory.
Save
1.
Select the file type
Follow the introduction in "
File Type" to select the type of the file to be saved.
Only state files and arbitrary waveform files can be stored via the instrument.
Note:

If File Type is currently set to "All File", the save operation is unavailable.

You can also refer to " To Create an Arbitrary Waveform" and "To
Edit Arbitrary Waveform" to save the arbitrary waveform file.
2. Open the filename input interface
In Store/Recall interface, set the
Browser as "File" and then press Save to
enter the filename input interface as shown in the figure below.
Figure 9-2 Filename Input Interface (English)
Filename Input Area Virtual Soft Keyboard