6703 ZINSER ST., SCHOFIELD, WI 54476
PHONE: 800.298.4351 FAX: 866.882.9475
www.raproducts.com
K&A MANUFACTURING
LEVEL
PAGE 1 OF 2
#2 SQUARE HEAD DRIVER BIT
TOOLS REQUIRED FOR ASSEMBLY:
VERSION DATED: 8/21/12
#2 PHILLIPS HEAD DRIVER BIT OR
CORDLESS DRILL
3
ATTACH THEM TO THE WORKSURFACE WITH (8) WOOD SCREWS
ON THE WORKSURFACE
.
STEP 5:
SURFACE. ATTACH IT WITH (2) MACHINE SCREWS
1
HOLES IN THE SQUARE PLATES WITH THE PILOT HOLES IN THE WORKSURFACE.
AND 1/2" IN FROM THE FRONT AND BACK EDGES. ATTACH
ON THE EDGE OF THE
THEM TO THE WORKSURFACE WITH (4) WOOD SCREWS
INSERTS.
HARDWARE PACK # 52444
1
3
INSTRUCTION # 52445
CENTER (2) WORKSURFACE JOINER PLATES
. NO PILOT HOLES
ARE PROVIDED FOR THESE.
THREADED INTO THE
8
STEP 6:
PLACE (2) POST LEGS ON THE BULB WORKSURFACE
WORKSURFACE
2
ALIGNING THE
5
ALIGNING THE HOLES IN THE LEG WITH THE THREADED INSERTS IN THE WORK-
R-STYLE PLAN 110 (24" DEEP) AND PLAN 120 (30" DEEP) WORKSTATION
ASSEMBLY INSTRUCTIONS:
STEP 1:
LAY THE CURVED WORKSURFACE
1
ON A PROTECTED SURFACE WITH
THE INSERTS AND PILOT HOLES FACING UP. REMOVE THE TOP DRAWERS FROM
THE STATIONARY PEDESTAL
7
FOR ACCESS TO THE SCREW HOLES.
STEP 2:
PLACE THE PEDESTAL ON THE WORKSURFACE BACK 1/8" FROM THE
FRONT OF THE WORKSURFACE
1
AND 1/2" IN FROM THE END OF THE WORK-
SURFACE. ATTACH IT TO THE WORKSURFACE WITH (6) WOOD SCREWS
3
.
DO NOT OVER-TIGHTEN THE SCREWS. USE A LOW TORQUE SETTING ON THE
DRILL.
STEP 3:
PLACE (1) OF THE POST LEGS
6
ON THE WORKSURFACE
1
ALIGNING
THE HOLES IN THE SQUARE PLATE WITH THE PILOT HOLES IN THE WORKSURFACE.
ATTACH IT TO THE WORKSURFACE WITH (4) WOOD SCREWS
3
.
STEP 4:
PLACE THE R-STYLE LEG ASSEMBLY
4
ITEM # PART #
DESCRIPTION
QTY.
1
VARIES CURVED WORKSURFACE
1
2
VARIES BULB WORKSURFACE
1
3
51708 M5 x 18mm SQ/PH/WSHR HEAD WOOD SCREW
26
4
VARIES R-STYLE LEG ASSEMBLY
1
5
50133 10-32 x 1/2 PHILLIPS TRUSS HEAD MACHINE SCREW
2
6
29SL 29SL POST LEG
3
7
VARIES STATIONARY PEDESTAL
1
8
800512 2 X 2 WORKSURFACE JOINER PLATE
2
OR 30" DEEP.
LEFT HAND. THE PEDESTAL MAY BE A BOX/BOX/FILE OR IT MAY
BE A FILE/FILE CONFIGURATION. THE WORKSTATION MAY BE 24"
NOTE: THE WORKSTATION CONFIGURATION MAY BE RIGHT OR
8
7
6
4
3
1
5
BEFORE BEGINNING
READ ALL THE INSTRUCTIONS
3
STEPS 1-5
2
STEP 6
