4
DETAIL A
6
BEFORE BEGINNING
STEP 1
READ ALL THE INSTRUCTIONS
LEVELING GLIDE
1
A
PAGE 1 OF 2
. ATTACH THE JOINER PLATES TO THE WORKSURFACE
, (2) IN EACH JOINER PLATE. NO PILOT HOLES
VERSION DATED: 9/27/11
USING (4) WOOD SCREWS
6
LEVEL
#2 SQUARE HEAD DRIVER BIT
AS SHOWN BELOW IN DETAIL B. ATTACH THE JOINER PLATES
#2 PHILLIPS HEAD DRIVER BIT OR
PLATE. NO PILOT HOLES ARE PROVIDED.
CORDLESS DRILL
TOOLS REQUIRED FOR ASSEMBLY:
ARE PROVIDED. SEE DETAIL A. DO NOT OVER-TIGHTEN THE SCREWS. USE A
LOW TORQUE SETTING ON THE DRILL.
INSTRUCTION # 52702
STEP 2:
CENTER (2) JOINER PLATES
TO THE WORKSURFACES USING (4) WOOD SCREWS
4
ON THE END EDGES OF OF THE 24"
, (2) IN EACH JOINER
WORKSURFACES
2
THAT WILL BUTT THE STRAIGHT EDGE OF THE HALF MOON
WORKSURFACE
3
6
R-STYLE (2) 24" DEEP AND (1) 48" HALF MOON WORKSTATION ASSEMBLY
INSTRUCTIONS:
STEP 1:
AFTER ASSEMBLING THE 24" DEEP WORKSTATIONS
1
, CENTER (2)
JOINER PLATES
4
ON ONE OF THE WORKSTATIONS IN THE LOCATIONS SHOWN
BELOW LEFT IN
STEP 1
ITEM # PART #
DESCRIPTION
QTY.
1
VARIES R-STYLE WORKSTATION 24" DEEP
2
2
VARIES 24" DEEP WORKSURFACE
2
3
10143 48x24 HALF MOON WORKSURFACE
1
4
800512 2 X 2 WORKSURFACE JOINER PLATE
4
5
29SL 29SL POST LEG
2
6
51708 M5 x 18mm SQ/PH/WSHR HEAD WOOD SCREW 24
6703 ZINSER ST., SCHOFIELD, WI 54476
PHONE: 800.298.4351 FAX: 866.882.9475
www.raproducts.com
K&A MANUFACTURING
DETAIL B
4
6
STEP 2
2
B
