Phoenix HT User Manual
© 2007–2012 Rigaku Automation, Inc.
22
401718 Rev A
Machine Control ...
: Displays the
Machine
Control
dialog to move the top and bottom trays.
Click the
Position
box to show the menu. Choose the
Forward
,
Middle
or
Back
position from the
menu and click the
Move
button to move the tray.
Figure 7. Machine Control Dialog
Robot:
Performs functions with the upper and lower plate shelves in the base system. The
shelves must be moved to the front, under the sensor bar, to perform these functions.
Figure 8. Robot Selections
The selections are:
Perform Plate Inventory
: This procedure senses whether a plate is at a particular position.
The barcode and other identifying functions are in other sections.
Toggle Top Active Nest
: Toggles the active nests in the upper shelf from the current state. If
the active nests were closed, this selection opens the active nests. The shelf must be in the
forward position. Performs no action if the active nests are not installed.
Toggle Bottom Active Nest
: Toggles the active nests in the lower shelf from the current state.
If the active nests were closed, this selection opens the active nests. The shelf must be in
the forward position. Performs no action if active nests are not installed.
Refresh DB Info:
Refreshes the display with the latest information from the database.
Reset Dialog Sizing:
Resets dialog boxes to their default sizes.
Logging:
Provides choices for the information that is captured to the log file. The default
choice is recommended for most applications. Other choices are available for specific uses.
Figure 9. Logging Selections
