Phoenix HT User Manual
© 2007–2012 Rigaku Automation, Inc.
4
401718 Rev A
In the Phoenix HT enclosure, when accessing the the chiller block through the left-side access
window, the location numbers are in reverse order because the Phoenix system faces the
Integration Module.
Figure 5. Phoenix HT Chiller Block Slots
Figure 6. Temperature Controller Front Panel
Figure 7. Temperature Controller Rear Panel
To apply power to the Protein Chiller Block, flip the rocker switch on the back of the box labeled
Thermoelectric Temperature Controller
underneath the deck.
To adjust the temperature, push and hold the
SET
button until the number on the display begins
flashing. Use the arrow keys to adjust the temperature setting. Push
SET
when the desired
setpoint is reached.
Always set to 7 V
Click to power ON.
