RF627Weld [Revision 1.1.1] 03.08.2020
Laser Seam Tracking System for Welding Automation. RF627Weld Series
23
15.4.3. Setting parameters
15.4.3.1. Procedure
Connect to the scanner by clicking on the connection panel. Then expand the
parameters panel you need and make changes. All settings, except for network
parameters, are applied immediately. For the network parameters to take affect, you need
to click
and restart the scanner.
All changes are made in RAM and will be lost when you restart the scanner. Always
save them to the nonvolatile memory before restarting the scanner.
15.4.3.2. Parameters
15.4.3.2.1. "Sensor" panel