RIEXINGER BSM 1000, Operating Manual

Page: 19 / 86

3. Technical data 17
Caution!
Saw bands that jump off the spool may injure the operator or cause material
damage.
Use original saw bands from the machine's manufacturer. Saw bands from other
providers may jump off the spool and injure the operator or cause material dam-
age to the machine or workpiece.
3.5 Workpieces
Type of material
PE, PP, PVDF plastics (other types of plastics after consultation
with manufacturer)
Profile
Pipe with circular cross-section (devations from circular cross-sec-
tion permissible up to ca. 50 mm)
BSM 631 BSM 800 BSM 1000
min. diameter in mm 200 200 315
max. diameter in mm 630 800 1000
min. length The workpiece must be tensioned sure.
Attention!
The BSM 631 / BSM 800 / BSM 1000 may only be used to saw glass fibre-rein-
forced plastics when the GFP-dust is ventilated with a ventilation system.
Dust is released into the air when sawing GFP, and this dust can very quickly
shutdown mechanical components and electrical equipment of the BSM 631 /
BSM 800 / BSM 1000. Therefore, a suitable ventilation system is absolutely nec-
essary when sawing GFP.
3.6 Electrical connection
BSM 631 BSM 800 BSM 1000
Operating voltage 400 V 3~/N/PE
Frequency 50 Hz
Power rating 5 kVA 5kVA 7,1kVA
Connection Type CEE-plug-in, 32 A, 400 V
Phase sequence Field turning clockwise
BSM 631 / BSM 800 / BSM 1000