Rievtech EXM-12DC-DA-R-HMI, User Manual

Page: 361 / 443

361
Input VALUE Value to be compared.
Outputs VALUE N: Output ON if Value = Value N.
VALUE N + 1 : Output ON if Value = Value N + 1.
VALUE N + 2 : Output ON if Value = Value N + 2.
VALUE N + 3 : Output ON if Value = Value N + 3.
VALUE N + 4 : Output ON if Value = Value N + 4.
VALUE N + 5 : Output ON if Value = Value N + 5.
VALUE N + 6 : Output ON if Value = Value N + 6.
VALUE N + 7 : Output ON if Value = Value N + 7.
Operation:
The comparison value (Value N) can be configured. It must be between 0 and 32760.
6.5.54 Compare in zone
Short Description
The COMP IN ZONE comparison function is used to compare one value between two set points (the MIN and
MAX values of the zone).
Connection Description
Input ENABLE a discrete ENABLE FUNCTION input; this input is Active if it is not connected.
Input VALUE TO
COMPARE
MOVE BACKWARD is the input which is used to control backward cam
movement; it moves one step backward at each rising edge (digital status is
changed from 0 to 1).
Input MIN VALUE A MIN VALUE input, whose type is Integer
Input MAX VALUE A MAX VALUE input, whose type is Integer
OUTPUT The OUTPUT indicates the result of the comparison when the ENABLE FUNCTION
input is active.
The OUTPUT does not change state when the ENABLE FUNCTION input is inactive.