16
1.30
Connection of the burner door and the
burner
Burner door
Fix the burner without leaving any empty space between the
front door and the burner head. Cover all the connection points
with insulating material to prevent leaks.
1
2
The insulation of the burner door (1) is done with a special ther-
mal ceramic that can withstand up to 1250° C and is not harmful
to people. Make sure that this insulating plate is handled care-
fully during transportation.
When assembling the burner, be careful not to leave any empty
space between the front door and the body of the burner. All the
points of contact should be covered with insulating material to
prevent air leaks.
It is possible to inspect the burner flame using a flame visor on
the door, positioned above the burner and made of tempered
ceramic glass (2).
1.31
Dimensions of the connection flange of the
burner
RTT 29-39
116
Ø 135
116
11
6
RTT 49-79
Choose a burner suitable for the values of the boiler's flue gases
side resistor.
9
The company is not responsible for any problems due to the
use of the boiler with uncertified or non-standard burners.
