Riello RS 100/M Installation, Use And Maintenance Instructions Download

Page: 27 / 52

Installation

20160778

4.12 Motor connection at 208-230 or 460V

WARNING

the motors, manufactured for 208-230/460

IE3 NEMA Premium Efficiency

voltage, have the same connection than

IE2/Epact

motors,

but different connection than

IE1

motors no more star/delta but star/double star.

Please, pay attention to the indications in case of modification of voltage, maintenance, or substitution.

4.13 Motor connection at 575V

WARNING

the motors, manufactured for 575V

IE3 NEMA Premium Efficiency

voltage, have the same control box base of the

IE1

and

IE2/Epact

motors.
Please pay attention to the indications in case of maintenance or substitution.

4.14 Reversible direction

WARNING

If it is necessary to reverse the direction then reverse the two main supply phases.
For example: L1 with L2, there is not difference between

IE1

IE2/Epact

and

IE3 NEMA Premium Efficiency.

D3686

IE1

IE2/Epact - IE3 NEMA Premium Efficiency

S8379

S8380

~ ~ ~

460V

208-230V

460V

208-230V

Fig. 27

S8382

~ ~ ~

575V

Fig. 28

/ / /

VKDIW

S8381

Fig. 29

Summary of Contents for RS 100/M





















































Search results

Summary of Contents for RS 100/M

Reviews:

Related manuals for RS 100/M

Brands by name

Popular brands

Riello RS 100/M, Installation, Use And Maintenance Instructions

Search results

Summary of Contents for RS 100/M

Reviews:

Related manuals for RS 100/M

Brands by name

Popular brands