Riello RLS 310/EV O2 MX, Modulating Operation

Page: 26 / 68

20182250 24 GB
Installation
5.9 Gas butterfly valve
If necessary, replace the gas butterfly valve. The correct position
is shown in Fig. 19.
5.10 Combustion head adjustment
Rotate the screw 1)(Fig. 20) until the notch you have found cor-
responds with the front surface of the screw itself.
The combustion head is opened by turning the screw 1) anti-
clockwise.
The combustion head is closed by turning the screw 1) clockwise.
Before starting the burner, carry out the adjustments for the out-
put required and which is indicated in the diagram (Fig. 18).
NOTE:
Depending on the specific application, the adjustment can
be modified.
WARNING
The burner leaves the factory with the combustion
head adjusted to notch 0 (Fig. 20).
This adjustment allows you to secure the moving
parts when the burner is being transported.
WARNING
The combustion head can be adjusted within the
following fields:
RLS 310: 0 - 11;
RLS 410: 5 - 16;
RLS 510: 2 - 16;
RLS 610: 0 - 6.
No adjustment can be made outside this interval.
Fig. 18
No. of notches (air = gas)
Maximum burner output (kW)
20096118
Fig. 19
20095470
YES
NO
Fig. 20
20086764