Riello GI/EMME 1400, Manual

Page: 16 / 80

20162463 14 GB
Technical description of the burner
4.13 Servomotor SQM40 ...
Important notes

All interventions (assembly and installation operations,
assistance, etc.) must be carried out by qualified personnel.

Falls and collisions can negatively affect the safety
functions. In this case, the servomotor must not be operated,
even if it displays no evident damage.

Fully disconnect the burner from the mains when working
near terminals and servomotor connections.

Condensation and exposure to water are not allowed.

For safety reasons, the servomotor must be checked after
long periods of non-use.
•
Technical data
ATTENTION
To avoid accidents, material or environmental
damage, observe the following instructions!
Avoid opening, modifying or forcing the
servomotor.
Mains voltage 230 V -15% +10%
Mains frequency 50 / 60 Hz
Power absorption 10 VA
Motor Synchronous
Drive angle Varying between 0° and 135°
Protection level Max. IP 66, with appropriate cable
entry
Cable entry 2 x M20
Cable connection terminal board for 0.5mm
2
(min.)
and 2.5mm
2
(max.)
Rotation direction Anticlockwise
Rated torque (max.) 10 Nm
Holding torque 5 Nm
Operation time * 30 s. at 90°
Weight approx. 2 kg
Environmental conditions:
Operation
Transport and storage
-20....+60° C
-20...+60°C
* with a frequency of 60Hz, the stroke times are faster of
about 17%.
Fig. 7
S8907