24
INStALLAtION
2.12
Electrical connection
AARIA MONO PLUS
It leaves the factory completely wired, and only
requires a connection to the electrical power grid, the installa-
tion of a padlockable disconnecting switch, and a connection to
the indoor unit.
9
The unit must be powered with a separate electric circuit.
1
Electric connection input
1
ON
OFF
—
position the system's main switch in the "OFF" position.
9
Wait 10 minutes before touching the device electric compo-
nents.
9
Check with a tester that the voltage between the power
supply connectors of the main electronic board is lower
than 10 Vdc.
To access the terminal board:
1
Terminal blocks
2
Terminal board cover panel
3
Connections cover
3
2
1
—
unscrew the fastening screw
—
push down the connection covering panel
—
remove the connection covering panel
—
unscrew the fastening screws
—
remove the terminal board cover panel
MODEL 25 - 35
1
Terminal blocks
2
Wire retainer
3
Earth screw
1
2
3
