15
INStALLAtION
L
L1
P
H
Model
25
35
50
Product dimensions
H
mm
550
550
614
L
mm
800
800
820
L1
mm
860
860
893
P
mm
280
280
338
Weight
kg
29,0
31,5
37,8
2.4
Storage
If the product is stored in a room before installation check:
—
there aren't continously operating ignition sources (open
flames, gas appliances, electric heaters,..) within a radius
of 2.5 m.
—
there is adequate ventilation
9
The product must be stored of according to the regulations
in force.
2.5
Handling and removal of the packing
9
before unpacking, personal protective clothing should be
worn and used transport means and tools suitable for the
size and weight of the unit.
9
Check refrigerant leak inside the packaging with a leak de-
tector suitable for the refrigerant used in the system.If a gas
leak is detected, probably the refrigerant circuit is dama-
ged and the product can't be installed; finally call Technical
Service
R
.
Product handling can also be done manually by grasping the
handles provided on the packaging.
1
Handles
2
Strapping bands
3
Document envelope and material supplied as kit
2
1
1
3
Follow the below instructions for packing removal and product
handling:
—
transport the equipment in the installation place
—
cut strapping bands
—
lift and remove the cardboard pack
The unit is supplied with the connections cover fixed to the unit
with adhesive tape to avoid damage during transport and han-
dling operations.
before handling operations it is necessary to fix the connections
cover to the unit:
1
Adhesive tape
2
Connections cover
3
Fixing screw
4
Handles
1
2
3
4
4
—
remove the adhesive tape
—
unscrew the connections cover fixing screw from the unit
—
position the connections cover
—
Reassemble the fixing screws.
—
handle the unit by grasping the handles provided.
—
remove the document envelope
9
In manual operation it is compulsory to respect always the
maximum weight per person provided for by the national
laws and standards.
9
Handle with care
9
The equipment must always be handled vertically
