Riello 20099252, Instructions For Installation, Use And Maintenance Manual

Page: 52 / 60

52
NexPolar
Table of functions and user parameters
Function Param-
eter
Description Icon Value range Set
value
Min Max
Mode 1 This parameter allows you to select the mode
0. Off
2. Cooling
3. Heating Current mode - - 0
Homeantifreeze 2 This parameter enables the ambient antifreeze option when the
system is off:
1. NO. Disabled
2. YES. Enabled antifreeze: 1 2 1
Ambient antifreeze tem-
perature 3 This code allows you to select the temperature threshold below
which the ambient (0/+ 2 °C hysteresis) antifreeze starts °C 6°C 12°C 6°C
Set point adjustment 4 Changing the water set point on the basis of the temperature
taken by the thermostat °C -5°C +5°C 0°C
frequency reduction
mode 5 This code provides the information whether the mode is activated:
Night/Reduction of the frequency
1. Not active
2. Active 1 2 1
Frequency reduction 6 Value of the compressor's frequency reduction in % 50% 100% 100%
Room mode 7 Lock The control panel displays these parameters
1. At home
2. Night
3. Away from home
Arrow depending
on the Touch 'N
Go selected
1 3 1
Room control set point 8 Lock This code is the control room set point determined by pressing the
home, night, away buttons
°C 12°C 38°C 20°C
Room set point 9 Lock This is the room air temperature read by the thermostat sensor °C -20°C 50°C
Relative humidity value
from the sensor 10 Lock This is the relative humidity value from the thermostat sensor % 0 100
Outdoor temperature 11 Lock Outdoor Temperature measured by the sensor °C -30°C 90°C
Outdoor temperature -
GMC 12 Lock Outdoor temperature read by the GMC board °C -20°C 65°C
Room sensor tempera-
ture adjustment 13 Correction of the temperature read to correct errors due to the
position of the thermostat. °C -5°C 5°C 0°C
Day period 14 This parameter speci fi es the number of periods per day that should
be activated for the timing programme:
2
4
6
2 6 4
"At home" temperature
in heating mode 15 AT HOME set point temperature in heating mode °C and the At
Home arrow
12°C 38°C 20°C
"At home" temperature
in cooling mode 16 AT HOME set point temperature in cooling mode °C and the At
Home arrow
12°C 38°C 24°C
“Night” temperature in
heating mode 17 NIGHT set point temperature in heating mode °C and the
night arrow
12°C 38°C 18°C
“Night” temperature in
cooling mode 18 NIGHT set point temperature in cooling mode °C and the
night arrow
12°C 38°C 26°C
“Away from Home”
temperature in heating
mode 19 AWAY FROM HOME set point temperature in heating mode °C and the away
from home arrow
12°C 38°C 15°C
“Away from Home”
temperature in cooling
mode 20 AWAY FROM HOME set point temperature in cooling mode °C and the away
from home arrow
12°C 38°C 28°C
Room set point 21 Lock Room set point °C 12°C 38°C 20°C
Last alarm code 22 Lock Shows the last alarm code - -
Alarms log 23 Lock Shows the 4 most recent error codes - -
In case of parameters which are read-only and cannot be edited by user, key pad lock ( Lock) icon is displayed on the screen.
The list of Read-only parameters is given below: 7, 8, 9, 10, 11, 12, 21, 22 and 23