AARIA
40
8. Set the correct time.
9. Ionizier
Upon first using the remote control unit
after changing the batteries or after
resetting it, it is necessary to reset the
current time.
Before starting the unit, select the
desired operation mode.
Press the clock button.
The “AM” or “PM” sign will start
blinking.
Operate the time+ and time- keys to
set the current time.
Press the set button to confirm.
The “AM” or “PM” sign will stop
blinking and the clock shall start
working.
Please set the current time with the
timer off.
If you only need to adjust the time, it
is not necessary to reset the unit.
The ionizer function regulates the
production of negative ions in all
operating modes, to improve room air
quality.
Activation
Press the health button and keep
it down until the relevant symbol
appears on the display.
Deactivation
Press the health button and keep
it down until the relevant symbol
disappears from the display.
Summary of Contents for 20034459
Page 1: ...www riello it AMS N AMT N ISTRUZIONI PER L UTENTE USER MANUAL cod Doc 0071679 Rev 5 11 2017 ...
Page 58: ......
Page 59: ......
