Riele Photometer 5010 V5+ Operating Instructions Manual Download Page 40 | Manualshive

Page: 40 / 74

background image

5010e_513.doc / 22.01.10

METHOD EDITOR

6 METHOD

EDITOR

By the method editor the daily laboratory work can be substantially facilitated. Based on the 15 calculation
procedures up to 231 user-defined methods with their setting parameters can be saved. With the functions of
the editor a method can be established, changed or deleted.

Fig. 6.1

Print-out of a method list:

METHOD 20: HEMOGLOBIN
F 29.4 405nm g/dl

METHOD 21: HDL-C

F 1.000 546nm mg/dl

METHOD 30: CREATININ

S 2.0 492nm mg/dl

METHOD 31: GOT
F–1746.0 340nm U/l

In the main window of the method editor
following options are available:

[METHOD COPY] Change to Fig. 6.2, where
different copy functions can be selected.

[METH. EDIT]   Change to Fig. 6.3, where the
number of the method to be edited is queried.
Afterwards all setting parameters of the
selected method can be changed.

[METHOD NEW]   Change to selection of the
calculation procedure (see 5.3 SURVEY OF
THE METHODS). In Fig. 6.4 all setting
parameters can be edited.

[METHODE DELETE]   Change to Fig. 6.3,
where the number of the method to be deleted
is queried. After a prompt for confirmation the
selected method is deleted. (Basic and fixed
methods cannot be deleted).

[LIST] A list of all programmed methods can
be printed and transmitted via the serial inter-
face.

[EXIT] Return to main menu

Fig. 6.2

[#

→

#] All methods from no 20 can be copied

to a new method no. First the method to be
copied is queried in Fig. 6.3. Its parameters
can be changed starting with Fig. 6.4.

[LAST] The method used last can be copied
on a new method place. Its setting parameters
can be changed starting with Fig. 6.4.
This function is very useful if a basic method
with new setting parameters was successfully
tested. These parameters can be saved as a
new method starting from no 20.

[EXIT] Return to main menu

M E T H O D N E W / C H A N G E / C O P Y

M E T H O D C O P Y L I S T

M E T H O D E D I T

M E T H O D N E W

M E T H O D D E L E T E E X I T

3 7 . 0 5 C 0 9 / 0 8 / 0 9 1 1 : 3 9

M E T H O D C O P Y

E X I T L A S T

# → #

ROBERT RIELE GmbH & Co KG

Page 40

6 -

«
...
38
39
40
41
42
...
»

Summary of Contents for Photometer 5010 V5+











































































Reviews:

No comments

Related manuals for Photometer 5010 V5+

Brand: PAT Pages: 55

Brand: PAT Pages: 31

WJHD309 - DIGITAL DISK RECORDER

Brand: Panasonic Pages: 101

Brand: C-LOGIC Pages: 4

Brand: C-lock Pages: 32

Brand: C-LOGIC Pages: 12

Brand: CAENels Pages: 75

Brand: Kawai Pages: 22

Concert Performer CP3

Brand: Kawai Pages: 40

Brand: Kawai Pages: 36

Brand: Kawai Pages: 148

Brand: Kawai Pages: 30

Classic Series CS6

Brand: Kawai Pages: 96

Brand: Katronic Pages: 3

FLUXUS ADM 6725

Brand: Katronic Technologies Pages: 148

Brand: Kawai Pages: 176

PowerCross-Laser 8 S

Brand: LaserLiner Pages: 64

ClimaHome-Check Plus

Brand: LaserLiner Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands